APS 10 D
APS 10 D
Subwoofer Driver | 800 W Peak Power | 250 mm | 4 + 4 ohm
Regular price
RM1,618.00
Regular price
Sale price
RM1,618.00
Unit price
/
per
The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
- Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility.
- Designed to deliver maximum performance in a sealed enclosure starting from 10 lt.
- Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the mounting depth to minimum.
- Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
- Massive motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
- Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
- Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers.
- Steel mesh grille and plastic gasket included.
SPECIFICATIONS
TECHNICAL SPECS
Size | 250 mm |
Power Handling - Peak | 800 W |
Power Handling - Continuous | 400 W |
Impedance | 4.4 Ohm |
Magnet Material | HIGH DENSITY FLUX FERRITE |
Voice Coil Ø | 60 mm |
Woofer Qes | 0,58 |
Cone Material | WATER REPELLENT PRESSED PAPER |
Xmax | 12.6 mm |
Xmech | 18 mm |
ELECTRIC-ACOUSTIC SPECS
D | 220 mm |
Driver Displacement Volume | 1.12 |
Re | 2.2 Ohm |
Fs | 27 Hz |
Vas | 41 l |
Mms | 170 g |
Cms | 0.2 mm/N |
BL | 10.4 T•m |
Qms | 4.7 |
Qts | 0.52 |
Le Standard | 1.5 mH |
Spl | 84 dB |
GENERAL
Weight | 5.24 kg |
DIMENSIONS
Dimension A | 270 mm |
Dimension B | 233 mm |
Dimension C | 105 mm |
Dimension D | 88 mm |